Prices subject to change without notice
End Stop (12 gauge)
#1000A use with 10 channel
#2000A use with 20 channe
End Stop
#1011 use with 10 channel
#2011 use with 20 channel
Roller End Stop
#1010S use with 10 channel
#2010S use with 10 channel
#1010P use with 10 channel
#2010P usenwith20 channel.
P = nylon roller S = steel roller
Impact Stop
#1010 use with 10 channel
#2010 use with 20 channel
CR-AS
Hi-Strength Ramped Aluminum End Stop
Typical Full-Angle Tyle End Stop
3-1/4” x 2” x 12 gauge galvanized x length required with nylon finish stripping. Field drilling required for installation. Attaching hardware supplied.
Typical Welded-On Angle End Stop
1-1/4” x 1-1/4” x 3/16” x Length required. Use with heavy-duty Pallet Rails.
Impact Stop
#1010 use with 10 channel
#2010 use with 20 channel
Hex Head Fastener
Drills - taps - fastens. Cuts installation time in half, provides a rigid, permanent structure
Medium-Duty Conveyor Rail Splicers
Field installed using 4 each 3/8" x 3/4" carriage bolts - supplied
Heavy-Duty Pallet Rail Conveyor Splicer
Field installed using 6 each 5/16" x 5/8" carriage bolts per slicer - supplied
Pallet Entry Guides
Installed at loading end of conveyor flo-lane to aid truck driver in the positioning of pallets. Both integral and bolt on available.