Access Ladders - Basic Model with Cage

Construction:

• 3/8" x 2-1/2" flat bar side rails
• 3/4" diameter round rungs
• 1-5/8" diameter tube 42" tall boarding rail
• Stand-off brackets on maximum 72" centers
• Heavy duty flatbed bar cage
• Standard 18" wide rungs on 12" centers
• Standard finish is gray paint

Standard Installation Considerations:
As per Federal Code 29CFR-1910.27, local codes may vary.

• Cages may be required on all access ladders of more than 20 feet to a maximum unbroken length of 30 feet
• Intermediate platforms of landings may be required at 30 foot intervals or fraction thereof, when overall height exceeds 30 feet
• When intermediate platforms are used adjacent ladder sections are to be off-set
• When exiting to the side at the top of the access ladder, rungs will continue 4 feet above the platform
• When exiting to the front at the top of the access ladder, boarding rails shall extend 42 inches above the top rungs.

Optional Features:

• 10-gauge steel security door (est weight -55 lbs)
• Bottom hoop security hatch (est weight -60 lbs)
• Foot pads in lieu of bottom stand-off brackets
• Split or extended stand-off brackets
• Dock treads (est weight - 2-1/2 lbs each)
• Integral platform - 30" wide x 30" deep (est weight - 255 lbs)
• 3" x 3" 1/4" angle side stringers
• Step-off platform at top
• Side exit to either side at top of cage ladder
• Optional colors available or hot dipped galvanized finish available