Premium Truck Scissor Dock Lifts - 10000 lb. Capacity

Manufacturer: Vestil

Volume Discounts Apply
FOB - Midwest Warehouse
 

View More Product Info

Save time and reduce man-hours where there are no docks with a Vestil Premium Truck Scissor Dock Lift.

Features:

  • The pit or surface mount has an optional approach ramp
  • Engineered and designed for maximum safety and efficiency
  • Diamond plate deck is made of heavy gauge steel for years of use
  • Hydraulic cylinders feature emergency velocity fuse if line breaks
  • Comes complete with upper travel limit switch and overload relief valve
  • Push button control is on a 20 foot long coil cord
  • Pre-wired control box includes magnetic starter with overload relay
  • High visibility safety yellow removable handrails with fixed toe boards are standard
  • Includes beveled toe-guards and electric toe-guards around perimeter of platform
  • Standard external 6.5 HP 460V, 3-phase, 60 Hz motor can be located up to 8 feet away from lift (weighs 300 lbs.)


Safety Features
The electric toe-guard is a patented feature essential to the safety of personnel. The guard is made from L-shaped aluminum extrusion and hangs below the entire perimeter of the deck. If the Scissor Dock is being lowered while an object such as a person’s hand or foot is in its path, the guard will be triggered and electrically stop the table from lowering. Once the object is removed, the table will once again be operable; there is no need to reset the unit. Without toe-guard provisions, scissor tables do not meet OSHA or ANSI standards and are extremely dangerous to operate.



9 Models Available for
Premium Truck Scissor Dock Lifts - 10000 lb. Capacity

*Prices subject to change without notice

Products without prices are not available for purchase through our shopping cart
If you are interested in these products, add them to your quote list by clicking the red button below

Model No. Platform Lowered Height Raised Height Uniform Capacity Overall Frame Size Weight Price ea. Qty
WL-100-10-68 72" W x 96" L 14" 72" 10000 lbs. 62" W x 93" L 5848 lbs. $14499.00
WL-100-10-78 84" W x 96" L 14" 72" 10000 lbs. 62" W x 93" L 6035 lbs. $15304.00
WL-100-10-88 96" W x 96" L 14" 72" 10000 lbs. 86" W x 93" L 6221 lbs. $15718.00
WL-100-10-610 72" W x 120" L 14" 72" 10000 lbs. 62" W x 118" L 6081 lbs. $15745.00
WL-100-10-710 84" W x 120" L 14" 72" 10000 lbs. 62" W x 118" L 6268 lbs. $15978.00
WL-100-10-810 96" W x 120" L 14" 72" 10000 lbs. 86" W x 118" L 6454 lbs. $16352.00
WL-100-10-612 72" W x 144" L 14" 72" 10000 lbs. 62" W x 118" L 6548 lbs. $16701.00
WL-100-10-712 84" W x 144" L 14" 72" 10000 lbs. 62" W x 118" L 6734 lbs. $16839.00
WL-100-10-812 96" W x 144" L 14" 72" 10000 lbs. 86" W x 118" L 6920 lbs. $19151.00


1 Option Available for
Premium Truck Scissor Dock Lifts - 10000 lb. Capacity

Premium Truck Scissor Dock Lifts - 10000 lb. Capacity Option Image

Option: Premium Truck Scissor Dock Lift Options

FOB: Midwest warehouse

Model No. Description Weight Price Ea. Qty
WL-SATB Split aluminum truck bridge: Ideal for government applications.
72" W x 18" L. For 5K and 6K units.
Replacement of standard steel bridge.
110 lbs. Call
WL-ADDSATB Split aluminum truck bridge: Ideal for government applications.
72" W x 18" L. For 5K and 6K units.
Additional split aluminum bridge.
110 lbs. Call
WL-SSTB Additional split steel bridge: Split steel bridge that can be added to the opposite side
of the truck scissor dock lift. 72" wide x 18" long.
180 lbs. Call
WL-RHT Removable handrails/toeboards: Used on a truck scissor dock lift that is mounted in a pit.
This allows the platform to be flush with the floor for fork truck cross traffic.
Pleased deduct 7-1/2" from overall width for usable width.
Call Call
WL-HH Additional hydraulic line: Allows you to locate power unit further away from the lift.
8 foot of hose is standard.
Call Call
WL-AR8-48 Approach ramp for 8" lowered height: 48" wide x 65" long. 7° ramp angle. 386 lbs. Call
WL-AR8 Approach ramp for 8" lowered height: 60" wide x 65" long. 7° ramp angle. 397 lbs. Call
WL-AR10 Approach ramp for 10" lowered height: 60" wide x 82" long. 7° ramp angle. 517 lbs. Call
WL-AR14 Approach ramp for 14" lowered height: 60" wide x 116" long. 7° ramp angle. 788 lbs. Call
WL-WBO Warning beeper: Sounds during the lifting and lowering operations. 80 decibels. Call Call
WL-WLO Warning strobe light: Light flashes during the lifting and lowering operations. Call Call
WL-WB Warning beeper and strobe: Sounds and flashes during the lifting and lowering operations. 80 decibels. Call Call
WL-50 50,000 lb. rollover capacity (25,000 lb. per axle)
Adds additional structural channel supports for the deck. Increases lowered height 2".
Call Call
WL-WK Mobile wheel kit: Kit may be used on the 5,000 and 6,000 lb. capacity units only.
System includes casters and handle.
400 lbs. Call
WL-RMB Special reservoir mounting: Available in a wall mount or a handrail mount (non-removable). Call Call
WL-SSS Stop signal sign: Optional stop sign signal that raises up to let the driver know
when to stop for safe loading/unloading.
This is only available on surface mount units with fixed toe boards.
Call Call
WL-KL Key switch lockout: Avoids unauthorized use of the lift.
This option will lock out the controls at the power unit.
Call Call
WL-TSP Two speed pump: Increase lifting speed by 55% when lift is unloaded.
Ideal for unloading applications.
Call Call
VCC-208/230-3 Voltage change: Change the power from standard 460V, 3-phase to 208/230V, 3-phase. Call Call
WL-3HP 3 HP single phase electric motor: Replace standard 3-phase power unit
with 208/230V, 1-phase, 60Hz power unit
(approximately 1-1/2 gallons per minute pump speed).
Call Call
WL-7HP 7-1/2 HP power unit: Power unit is wired for 3-phase.
208-230/460V, 60Hz, unit will pump approximately 6 gallons per minute.
Call Call
WL-10HP 10 HP power unit: Power unit is wired for 3-phase.
208-230/460V, 60Hz, unit will pump approximately 8 gallons per unit.
Call Call
SPO-WL-LS-ZRC Cold galvanized liquid coating: For application usage visit www.zrcworldwide.com. Call Call
SPO-WL-LS-SSC Steel-It coating: Visit www.steel-it.com for application usage. Call Call
IOH-230V Immersion oil heater: For cold weather applications with a built-in metal reservoir
and thermostat for automatic heat control. 208-230V, single or 3-phase power, 250 watts.
This option can only be used in steel tanks.
Call Call
IOH-460V Immersion oil heater: Use with 460V, 3-phase power unit. 500 watts. Call Call